14
Recording Data
Note…
Most of the buttons on the meter are disabled during recording.
All settings must be selected before recording begins.
1. Press
REC
to begin recording the readings. “REC”
displays on the LCD. If 16,000 readings have been stored
for a channel, “REC FULL” blinks on the LCD.
2. Press
REC
to stop recording.
Note…
The meter will not record if battery power is extremely low.
Note…
REC FULL stays on the display until the data is cleared.
Computer can still access the data even though REC FULL
is displayed.
Clearing the Recorded Data
1. Press and hold
POWER
for 3 seconds to turn the meter
off
.
2. Press and hold
REC
.
3. While continuing to hold
REC
, press and hold
POWER
to
turn the meter
on
.
4. Continue to hold
REC
and
POWER
. The meter displays
“REC,” “Clr” and “SUrE 5” and counts down to zero.
5. To exit the process without clearing the memory, release
the
REC
and
POWER
buttons before “SUrE 0” displays.