iX20
Spektrum™ AirWare™ Change Log
2021-March-4
Version 1.05.02
New Features
•
Stick and Switch positions recorded via Telemetry Log -
The stick/switch
positions are now recorded in real time when using the telemetry logging feature.
These logs can be viewed using 3
rd
party PC programs.
•
Automatic File Backup-
Model files are now automatically backed up to internal
storage when changing to another model. Also, upon initial update installation,
every model file currently in-place will be backed up to the internal memory.
See
instructions below to learn more.
•
Direct access to pre-loaded BNF model files-
A BNF button has been added
in the Add a New Model menu in the Model Utilities screen. This list is preloaded
with all current and popular Bind-n-Fly and Plug and Play models, making it even
easier to get started with new models. This list will be updated and expanded
with future updates.
Please note
– ALWAYS check control limits and directions
for accuracy before initial flight
.
Corrections & Improvements
•
Telemetry Airware issue-
When using a GPS and Altitude sensor
simultaneously, certain telemetry configurations could cause Airware to crash.
This has been corrected.
•
Flap System Crow function-
100% Crow values no longer causes servo
twitching on ailerons
•
Legacy Receiver Compatibility-
Corrected servo “glitch” problem with older
22ms DSM2 and DSMX receivers.
•
Sequencer Graph issue
- When using a Sequencer in Step Mode, in some
cases the channel values and switch position were not changing as expected.
The graphs are now displayed correctly.
•
Register Transmitter-
At the bottom of the Product Information screen, once the
TX is registered the Register Transmitter is replaced with Transmitter Registered.
•
Typo-
The "Receiver is Rebooting
” screen has been corrected.
•
Power Safe Receivers-
The RX Pack Capacity/ Current readings format is now
displayed in amps (not mA)
•
Audio Trim reports -
Audio trim report now function properly when activated
•
BNF model sequencer issue-
If a Sequencer function is added to a BNF model
file the sequencer functions correctly
•
Model Names-
The model name length is now consistent throughout the system
•
DSM2 mode-
When selecting DSM2 in the Frame rate screen and then selecting
Auto, the RXs no longer get stuck binding in DSM2 mode
