background image

2

SPEKTRUM DX5 RUGGED • TRANSMITTER INSTRUCTION MANUAL

EN

WARNING:

 Read the ENTIRE instruction manual to become familiar with the features of the product before operating. 

Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. 

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechani-
cal ability. Failure to operate this product in a safe and responsible manner could result in injury or damage to the product or 
other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use 
with incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains 
instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, 
prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

WARNING AGAINST COUNTERFEIT PRODUCTS 

Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon 

Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit 
products or products claiming compatibility with DSM or Spektrum technology.

Age Recommendation: Not for Children under 14 years. This is not a toy.

WARRANTY REGISTRATION

Visit community.spektrumrc.com today to register your product.

SAFETY PRECAUTIONS

•  Always ensure all batteries have been properly charged prior 

to using the model.

•  Always check all servos and their connections prior to each run.
•  Never operate your model near spectators, parking areas or any oth-

er area that could result in injury to people or damage of property.

•  Never operate your model during adverse weather conditions. Poor 

visibility can cause disorientation and loss of control of your model.

•  Never point the transmitter antenna directly toward the model. The 

radiation pattern from the tip of the antenna is inherently low.

•  If at any time during the operation of your model you observe any er-

ratic or abnormal operation, immediately stop operation of your model 
until the cause of the problem has been ascertained and corrected.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For 
up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this Product.

MEANING OF SPECIAL LANGUAGE

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:

WARNING:

 Procedures, which if not properly followed, create the probability of property damage, collateral damage and serious 

injury OR create a high probability of superficial injury.

CAUTION:

 Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.

NOTICE:

 Procedures, which if not properly followed, create a possibility of physical property damage AND little or no possibility of injury.

NOTICE:

 This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby 

disclaims all liability outside of the intended purpose and will not provide warranty service related thereto.

WATER-RESISTANT TRANSMITTER

Your new Horizon Hobby transmitter has a special water-resistant 
coating on the electronics to ensure reliable performance in 
higher than average moisture conditions. This conformal coating 
can offer mild protection from light drops of water.

•  DO NOT

 submerge this product under water for any period 

of time. If it is submerged, it may result in damage or loss of 
function. 

•  DO NOT

 pour water onto or allow excess water to come in 

direct contact with the product. 

•  DO NOT

 operate this product in heavy rain or snow.

•  DO NOT

 expose this product to salt water (ocean water or 

water on salt-covered roads), contaminated or polluted water. 

In case of excess exposure to water or debris, immediately wipe 
down the transmitter with a soft cloth, and allow it to fully dry 
before next use.

NOTICE: 

While this transmitter may have an above-average 

resistance to water, make sure the other components in your vehicle 
are waterproof or water-resistant before operating in wet conditions.

Summary of Contents for DX5 Rugged

























Reviews: