background image

20

SPEKTRUM DX4S • TRANSMITTER INSTRUCTION MANUAL

EN

1-YEAR LIMITED WARRANTY

What this Warranty Covers

Horizon Hobby, LLC (Horizon) warrants to the original purchaser 

that the product purchased (the “Product”) will be free from 

defects in materials and workmanship for a period of 1 years 

from the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i) cosmetic 

damage, (ii) damage due to acts of God, accident, misuse, abuse, 

negligence, commercial use, or due to improper use, installation, 

operation or maintenance, (iii) modification of or to any part of the 

Product, (iv) attempted service by anyone other than a Horizon 

Hobby authorized service center, (v) Product not purchased from 

an authorized Horizon dealer, or (vi) Product not compliant with 

applicable technical regulations. 

OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON 

MAKES NO OTHER WARRANTY OR REPRESENTATION, AND 

HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, 

INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES 

OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES 

THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT 

WILL SUITABLY MEET THE REQUIREMENTS OF THE 

PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive 

remedy shall be that Horizon will, at its option, either (i) service, 

or (ii) replace, any Product determined by Horizon to be defective. 

Horizon reserves the right to inspect any and all Product(s) 

involved in a warranty claim. Service or replacement decisions 

are at the sole discretion of Horizon. Proof of purchase is 

required for all warranty claims. SERVICE OR REPLACEMENT AS 

PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S SOLE 

AND EXCLUSIVE REMEDY. 

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF 

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY 

WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN 

CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY 

OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS 

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

Further, in no event shall the liability of Horizon exceed the 

individual price of the Product on which liability is asserted. 

As Horizon has no control over use, setup, final assembly, 

modification or misuse, no liability shall be assumed nor 

accepted for any resulting damage or injury. By the act of use, 

setup or assembly, the user accepts all resulting liability. If you 

as the purchaser or user are not prepared to accept the liability 

associated with the use of the Product, purchaser is advised to 

return the Product immediately in new and unused condition to 

the place of purchase.

Law

These terms are governed by Illinois law (without regard to 

conflict of law principals). This warranty gives you specific legal 

rights, and you may also have other rights which vary from state 

to state. Horizon reserves the right to change or modify this 

warranty at any time without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide 

warranty support or service. Once assembly, setup or use of the 

Product has been started, you must contact your local distributor 

or Horizon directly. This will enable Horizon to better answer your 

questions and service you in the event that you may need any 

assistance. For questions or assistance, please visit our website 

at www.horizonhobby.com, submit a Product Support Inquiry, or 

call the toll free telephone number referenced in the Warranty 

and Service Contact Information section to speak with a Product 

Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is compliant 

in the country you live and use the Product in, please use the 

Horizon Online Service Request submission process found on 

our website or call Horizon to obtain a Return Merchandise 

Authorization (RMA) number. Pack the Product securely using a 

shipping carton. Please note that original boxes may be included, 

but are not designed to withstand the rigors of shipping without 

additional protection. Ship via a carrier that provides tracking 

and insurance for lost or damaged parcels, as Horizon is not 

responsible for merchandise until it arrives and is accepted at 

our facility. An Online Service Request is available at http://www.

horizonhobby.com/content/_service-center_render-service-

center. If you do not have internet access, please contact Horizon 

Product Support to obtain a RMA number along with instructions 

for submitting your product for service. When calling Horizon, 

you will be asked to provide your complete name, street address, 

email address and phone number where you can be reached 

during business hours. When sending product into Horizon, 

please include your RMA number, a list of the included items, 

and a brief summary of the problem. A copy of your original sales 

receipt must be included for warranty consideration. Be sure 

your name, address, and RMA number are clearly written on the 

outside of the shipping carton. 

NOTICE: Do not ship Li-Po batteries to Horizon. If you  

have any issue with a Li-Po battery, please contact  

the appropriate Horizon Product Support office.
Warranty Requirements

For Warranty consideration, you must include your original sales 

receipt verifying the proof-of-purchase date. Provided warranty 

conditions have been met, your Product will be serviced or 

replaced free of charge. Service or replacement decisions are at 

the sole discretion of Horizon.

Non-Warranty Service
Should your service not be covered by warranty, service 

will be completed and payment will be required without 

notification or estimate of the expense unless the 

expense exceeds 50% of the retail purchase cost.

 By 

submitting the item for service you are agreeing to payment of 

the service without notification. Service estimates are available 

upon request. You must include this request with your item 

submitted for service. Non-warranty service estimates will be 

billed a minimum of ½ hour of labor. In addition you will be billed 

for return freight. Horizon accepts money orders and cashier’s 

checks, as well as Visa, MasterCard, American Express, and 

Discover cards. By submitting any item to Horizon for service, 

you are agreeing to Horizon’s Terms and Conditions found on 

our website http://www.horizonhobby.com/content/_service-

center_render-service-center. 

ATTENTION:  Horizon service is limited to Product 

compliant in the country of use and ownership. If 

received, a non-compliant Product will not be serviced. 

Further, the sender will be responsible for arranging 

return shipment of the un-serviced Product, through 

a carrier of the sender’s choice and at the sender’s 

expense. Horizon will hold non-compliant Product for a 

period of 60 days from notification, after which it will be 

discarded.

Summary of Contents for DX4S























Reviews: