Speedtouch IPQoS, Configuration Manual

Page: 60 / 124

Chapter 5
Packet Classification and Labelling
E-NIT-CTC-20041213-0013 v0.5
58
List an expression
Execute the following CLI command to view a list with all the expressions:
The output will look like this :
There are expressions that start with
_
like
_
10.0.0.138. These are dynamically
generated. Expressions are generated dynamically mainly for firewall use but can be
used for other purposes as well.
The list command can be refined by adding the expression name and/or type
Execute the following CLI command to list all expressions with the name ftp and the
type set to serv in a pretty format.
The output will look like this :
The same command with the format set to CLI will give an output like this :
This actualy will give you the extended CLI command used to add the expression.
Now we can create,modify,delete and list labels, rules and expressions.
{Administrator}=>:expr list
name type use flags expression
-----------------------------------------------------------------------
DHCP-R_if_0 intf
1 D 1. intf=lan1
wan intf 1 1. intfgroup=0
lan intf 13 1. intfgroup=2
local intf 1 1. intfgroup=1
_Internet intf 0 D 1. intf=Internet
_lan1 intf 0 D 1. intf=lan1
HTTPI_if_0 intf 1 D 1. intf=lan1
2. intf=lan1
3. intf=lan1
HTTP_if_0 intf 1 D 1. intfgroup=2
HTTPs_if_0 intf 1 D 1. intfgroup=2
FTP_if_0 intf 1 D 1. intfgroup=2
TELNET_if_0 intf 1 D 1. intfgroup=2
DNS-S_if_0 intf 1 D 1. intfgroup=2
SNMP_AGENT_if_0 intf 1 D 1. intfgroup=2
PING_RESPONDER_if_0 intf 1 D 1. intfgroup=2
ssdp_ip ip 0 1. addr=239.255.255.250
mdap_ip ip 0 1. addr=224.0.0.103
_10.0.0.138 ip 0 D 1. addr=10.0.0.138
_192.168.1.254 ip 0 D 1. addr=192.168.1.254
HTTP_sv_0 serv 1 D 1. proto=6 dst-prt=80
HTTPs_sv_0 serv 1 D 1. proto=6 dst-prt=443
FTP_sv_0 serv 1 D 1. proto=6 dst-prt=21
TELNET_sv_0 serv 1 D 1. proto=6 dst-prt=23
DNS-S_sv_0 serv 1 D 1. proto=17 dst-prt=53
{Administrator}[expr]=>list name ftp type serv format pretty
name type use flags expression
-----------------------------------------------------------------------
ftp
serv 0 1. proto=6 dst-prt=21
2. proto=6 dst-prt=20
:expr add name=ftp type=serv proto=tcp dstport=ftp
:expr add name=ftp type=serv proto=tcp dstport=ftp-data