SAFETY PRECAUTIONS
Clothing
Do not wear loose clothing or jewelry which may be caught by moving elements. Always wear leather clothes
when holding the winch rope. Do not hold the steel rope with bare hands, even minor cracks on the line may
cause injuries. It is recommended to wear non-slip shoes. Use headgear and pin up long hair.
Keep safe distance
Make sure unauthorized people are kept at appropriate distance from the working winch and its rope. The
recommended distance is 1.5 times rope length.
REMEMBER THAT BREAKING ROPE MAY CAUSE SEVERE INJURIES OR EVEN DEATH TO THE PEOPLE IN ITS
WAY.
Do not cross wind rope and do not stand over the rope.
Do not overload the winch
The details describing the winch capacity provided in the manual are the maximum, not working parameters.
Remember that the winch pull force parameters are specified for ideal conditions, which does not consider
land elevation, terrain obstacles, etc. Therefore, remember to select the winch that is appropriate to your
needs. Details of the selection are specified further on in the manual.
If the motor is overheated, stop working for a couple of minutes and let it cool down.
If the motor stops, disconnect power supply and diagnose the cause.
WINCH PROPERTIES
Power: 6.0 HP
Motor: Series Wound
Gear Ratio: 265:1
PRINCIPLES OF WINCH OPERATION
The load should be pulled in a straight line. If it is necessary to pull the load at an angle, use appropriate pulley
block.
When pulling the load, pay attention to correct arrangement of the rope on the drum. It is essential that the
rope is not wound in one place and avoid jamming the rope between previous fakes. In such cases, unwind the
rope and start winding again.
Summary of Contents for PCE553.1006
Page 4: ...WIRING DIAGRAM...
