23
Signal Connection
Only one input signal splicing mode is used for the splicing function. That is to say, the same
channel can only output the same signal source (available signal loop connection or signal
distribution input) to the LED panel after the signal source is processed by the video processor.
Take DVI input splicing for example and the connection mode is as shown in Fig. 10.1.
Part 1
Part 2
Part 3
Processor 1 Processor 2 Processor 3
Fig.10.1 Schematic Diagram of Splicing
Splicing Function Settings
After connecting the equipment correctly, set corresponding output resolution and splicing
mode according to physical resolution of the LED panel. To set the output resolution, select
"output"
→
"output resolution"
→
"resolution".
LVP2200 splicing includes equal splicing and unequal splicing, in which the equal splicing
refers to the horizontal pixels and the vertical pixels of each part of the video wall are equal,
while the unequal splicing refers to the pixels are unequal.
DVI
DVI1
DVI1 LOOP
DVI1
DVI1 LOOP
DVI1
DVI1 LOOP
