9
※ The main body and ⑤ and ⑥ covers are delivered in assembled condition.
1. Components: Treadmill body, console (①), handle (②), column left / right (③, ④), tool
2. Connect the cable connection cable of cover ⑥ of the main body to the lower cable
connection line of ④ pole.
3. Insert the ③ and ④ pillar (the round part is out) into the groove of the cover of ⑤ and ⑥
cover.
4. (2) Connect the connecting wire of the handle to the upper connecting wire of column (4).
5. ② Place the handle on the column and tighten the bolt, spring washer, and flat washer.
6. Tighten the bolt with a T wrench (6mm) to the groove on the side of cover ⑤ and ⑥.
7. ② Connect the connector on the top of the handle to the console.
7. Insert the console into the handle joint ②, tighten the bolts, insert the batteries, and check
the operation.
8. Adjust the level foot and tighten the nuts so that the product does not shake.
How to assemble Pro XL
4. ASSEMBLY PROCEDURES
1
3,4
5
6
2. Pro XL
①
②
③
④
⑤
⑥
