Using GMOS 11
Drive Mode
Drivie Mode is suitable for open road cruising. Start your ride after you enter Drive
Mode. GMOS will display the riding motion data collected real time, including GPS
speed, top GPS speed, acceleration/deceleration G, real time lean angle, max left/
right lean angle, and show the max angle history of the last three turns.
To record the data, press
SELECT
. The envelope-shaped REC Icon will start flash
-
ing, and a “
START LOGGING
” message will be displayed. To stop recording, press
SELECT
again. Below are a diagram and a table of the Drive mode features:
12:30
TOP
82
75
KMH
28
-
+
45
33
21
37
45
1
1
2
3
4
5
6
7
8
9
8
10
11
12
13
Icons and Their Functions:
1
GPS Antenna Icon
indicates the quality of GPS signal reception. The more vertical lines the icon
displays, the better the reception, and thus the higher the positioning accuracy.
•
If there are less than 4 satellites locked, the GPS Antenna Icon will not be
displayed. This will not interrupt ongoing log recording. However, if this hap-
pens when you are pressing
SELECT
to start a new log, the system will not
start recording. Instead, a “
POSITIONING
” message will appear for about 2
seconds in the Message Area. The GPS Antenna Icon will reappear when
the positioning process is completed. Then you can press
SELECT
again
to start recording a new log.
2
REC Icon
flashes when GMOS is recording. The icon will flash faster when there is
about 50 minutes of memory left, at double speed when there is about 10 min-
utes left, and stays visible when the memory is full.
