background image

Before Drying

 Energy Saving Tips

• Make sure the lint filter is always clean.
• Do not overload the dryer.
• Do not overdry items.
• Remove items to be ironed while still damp.
• Large loads of similar fabrics dry the most efficiently. How-

ever, dry permanent press in smaller loads to prevent wrin-
kling.

• Use the correct cycle for the type of fabric being dried.
• Locate your dryer so the exhaust duct is as short and

straight as possible.

• Do not open the door during the drying cycle.
• Plan to do your laundry on low humidity days; your clothes

will dry faster.

• Dry multiple loads of clothes one right after another so dry-

er interior does not have to be reheated for each load.

 Helps and Hints

WARNING

To reduce the risk of fire, explosion, serious injury or
death, clothes which have traces of any flammable
substances such as cooking oil, machine oil, flam-
mable chemicals, thinner, etc. must not be put into
the dryer.

W131

• The directions for installation and proper exhausting are

given in the Installation Instructions which are included
with the dryer.

• Static electricity may cause garments of synthetic fibers (as

in lingerie) to cling together, especially if they are overdried.
The use of a liquid fabric softener in the rinse water of the
washer, or a fabric softener sheet in the dryer, will soften
clothes and reduce static electricity.

• Do not wash or dry clothes that shed lint in the same load

with permanent press or knit garments.

• Remove permanent press loads immediately after dryer

stops.

• Follow the care labels on FLAME RETARDANT, SCOTCH-

GUARD

, etc., garments for proper washing and drying.

• If loads should be damp for ironing, use the Damp Dryness

setting, in an Automatic cycle.

 Sort

If you have correctly sorted the items for washing, they should
be properly sorted for drying too.

1.  Sort by color.
2.  Separate lint shedding fabrics and lint receiving fabrics.

Towels, flannels, chenille, cottons, rugs, etc., shed lint. Cor-
duroys, knits (including socks), permanent press, and syn-
thetics attract lint.

3.  Separate no heat, low heat and high heat items.

In any kind of drying, lightweight fabrics will dry faster than
heavyweight fabrics. If mixed loads are dried together (such as
sheets and towels), remove the lighter weight fabrics when
they are dry to prevent overdrying and wrinkling. The best
method is to dry clothes which require the same time, temper-
ature or dryness level in the same load.

 Load

WARNING

Do not wash or dry items soiled with vegetable or
cooking oils. Some oils may remain after washing
and may cause the fabric to catch on fire by itself.

W527

• Do not overload your dryer. Bulk, not weight, determines

the load size. If the dryer is overloaded, it could cause dis-
coloration or permanent heat damage to the load.

• There should be space in the dryer for the clothes to tum-

ble freely and help to reduce wrinkles.

• Large and small pieces together make up loads which will

tumble well. Permanent press loads should be smaller to
provide room for tumbling. Proper tumbling allows for fewer
wrinkles.

• A load can be too small. Just a few small pieces will not

tumble properly. They will take longer to dry and they may
be wrinkled. For small loads, add a couple of large towels
or non lint shedding items to aid in tumbling.

• The following illustrations show the ideal load sizes for fab-

rics. The average load will fill the cylinder one third to half
full when wet.

Cylinder with wet linens and cottons

D665I_SVG

Before Drying

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  9

  Part No. D516891EN

Summary of Contents for SF7000WG




















Reviews: