background image

-9-

202147

Operating Your Washer

Determine Proper Cycle

(Some cycles may not be included on your model)

Regular Cycle

Use for sturdy items, like play or work clothes, 
towels, T-shirts, etc. The wash time selection will 
depend on the type of fabric and the amount of 
soil. For the best results when cleaning heavily 
soiled items, use a longer wash time (15 minutes 
maximum). Lightly soiled items require less wash 
time and spin out.

If available, use the Prewash setting for extra 
heavily soiled items. During the PREWASH 
setting, the washtub will fill with water, agitate for 
a reduced period of time and spin out.

There are three settings in the REGULAR cycle –
Heavy, Normal and Light.

Permanent Press Cycle

Use for permanent press items and synthetics. 
The wash time selection will depend upon the type 
of fabric and amount of soil. 

There are two settings in the PERMANENT 
PRESS cycle – Normal and Light.

Handwash/Delicate Cycle (on select 
models only)

Wash delicate items usually washed by hand on 
this cycle. A full tub of water is recommended 
(even for small loads) to allow the delicate items 
to move freely through the water. More water 
helps reduce fabric wear, wrinkling, and provides 
for a clean wash.

There are two settings in the HANDWASH/ 
DELICATE cycle – Normal and Light.

Delicate Cycle (on select models only)

Wash delicate items usually washed by hand on 
this cycle. A full tub of water is recommended 
(even for small loads) to allow the delicate items 
to move freely through the water. More water 
helps reduce fabric wear, wrinkling, and provides 
for a clean wash.

There is one setting in the DELICATE cycle – 
Normal.

Hand Wash Cycle (on select models only)

Wash items usually washed by hand on this cycle. 
A full tub of water is recommended (even for small 
loads) to allow the delicate items to move freely 
through the water. More water helps reduce 
fabric wear, wrinkling, and provides for a clean 
wash.

Soak/Prewash (on select models only)

Use for heavily soiled or stained clothing. During 
the SOAK/PREWASH setting, the washtub will fill 
with water, agitate for a reduced period of time, 
pause for approximately 12 minutes, and spin out 
to complete the cycle.

Extra Rinse (on select models only)

This optional setting is useful for detergent 
sensitive skin. By pressing the “Extra Rinse” 
button to “ON,” the REGULAR, PERMANENT 
PRESS and HANDWASH/DELICATE cycles will 
each provide an additional rinse.

To reduce the risk of fire, electric shock, 
serious injury or death to persons, read 
the 

Safety Information

 section before 

operating your washer.

W522

W A R N I N G

Summary of Contents for AWN432S





























Reviews: