RECORDING PARAMETERS ADJUSTMENT
23
In the
Inputs
screen perform the setting of the right channel in the same way as
was done for the left channel.
To return to the
Recording settings
screen, press the
button.
If all inputs are set to state
Left In
none
and
Right In
none
,
when you switch voice recorded on in the
RECORD
mode warning
message will appear.
Switch recording off.
To exit the warning message, press the
button.
Set at least one source as described above.
Autodetect
– mode of the sound source detect
In the
Record settings
screen with the
or
buttons, select the current val-
ue:
Autodetect
on
or
Autodetect
off
.
To change AutoDetect status, press the button.
With the
or
buttons, select the necessary value of parameter
Autodetect
on
or
Autodetect
off
.
To apply the selected value of the parameter, press the button.
User settings of the signal source (see the
Left Input
and
Right Input
section) have priority
over the autodetect.
For example, after switching the voice recorder off and disconnecting the autodetected device
(external headphones, Ln in cable), then when you switch on the voice recorder again, there
will be available the audio signal source that you have connected before the activation of the
Autodetection mode.
AGC Left and AGC Right
– AGC mode switching on;
In the
Record settings
screen with the
or
button, select the
Automatic
gain control (AGC) of the left channel
parameter:
AGC Left
off
To change the status of the AGC left channel, press the button.
With the
or
buttons, select the necessary value of parameter
AGC Left
on
or
AGC Left
off
To apply the selected value of the AGC left channel, press the button.
In the
Record settings
screen with the
or
buttons, select the
Automatic
gain control (AGC) of the right channel
parameter:
AGC Right
off
To change the status of the AGC right channel, press the button.
With the
or
buttons, select the necessary value of parameter
AGC Right
on
or
AGC Right
off
To apply the selected value of the AGC right channel, press the button.