Spectrum Winco EICS-18 Installation And Operating Instruction Manual Download Page 11

11

Limited Warranty

Please keep this manual in a safe place for future use!

WINCO® warrants to the original purchaser of new equipment that said 

equipment, when installed in accordance with our instructions within 

North America and subjected to normal use, is free from defects in 

material or workmanship for a period of 1 year. The labor warranty is 

one year from original installation or 18 months from actual factory 

shipment date, whichever date occurs first. 

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, 

WHETHER EXPRESSED OR IMPLIED. WINCO EXPRESSLY 

DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR EXPRESSED OR IMPLIED WARRANTY OF FITNESS FOR A 

PARTICULAR PURPOSE.

WINCO’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY 

IS EXPRESSLY LIMITED TO REPAIRING AND REPLACING 

EQUIPMENT THAT PROVES TO BE DEFECTIVE IN MATERIAL OR 

WORKMANSHIP WITHIN THE APPLICABLE WARRANTY PERIOD. 

IN NO EVENT SHALL WINCO BE LIABLE FOR INCIDENTAL OR 

CONSEQUENTIAL DAMAGES TO BUYER OR ANY THIRD PARTY, 

INCLUDING, WITHOUT LIMITATION, LOSS OF PROPERTY, 

PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER 

ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES, 

WHETHER IN NEGLIGENCE, WARRANTY, STRICT LIABILITY, OR 

OTHERWISE.

This warranty is given only to the first purchaser from a retail dealer. 

No warranty is given to subsequent transferees.

Warranty does not cover product failures caused by: failure to maintain, 

neglect, abuse, damage due to excess water, fire, normal wear, 

improper set up and use. Periodic maintenance is not covered.

This warranty is not in force until such time as a properly completed 

and digitally signed Installation/Warranty Registration has been 

received by WINCO within 30 days from the date of installation. 

WARRANTY SERVICE

To initiate warranty service 
email: 

[email protected]

 or call: 

973-295-3899

DO NOT send unit to WINCO® without first contacting our customer 

service department. 
Please provide or have the following information available:

• 

Model & Serial Number (located on the silver identification tag, on side 

or rear of unit)

• 

Date of Purchase

• 

Purchase Dealer

• 

Operator / Installation Contact Information

• 

Business Name & Business Address

• 

Contact Name & Contact Telephone Number

REGISTER ONLINE AT:
www.wincous.com

Proof of purchase is required to extend warranty more than 1 year from 

date of shipment from the factory.

THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE 

AND EXCLUSIVE STATEMENT BETWEEN THE BUYER AND SELLER. 

WINCO® NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS 

TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN 

CONNECTION WITH SAID EQUIPMENT.

Examples of items not covered under warranty, but not limited to just 

these items:

1.  Natural disasters (ie: earthquakes, tornadoes, hurricanes, etc.), fire, 

water damage, burglary, accident, theft.

2.  Freight damage.

3.  Improper installation or alteration of equipment.

4.  Use of generic or after-market parts.

5.  Repairs made by anyone other than a WINCO® designated service 

provider.

6.  Lubrication.

7.  Expendable wear parts, adjustable feet, blown fuses, lamps, etc.

8.  Cleaning of equipment.

9.  Misuse or abuse.

Warranty voided if:

1.  Product is altered by user

2.  Serial number plate is removed

3.  Product is installed in a prison or any correctional facility.

Summary of Contents for Winco EICS-18













Reviews: