22
SPEKTRUM DX3S USER GUIDE
sysTeM
The System function allows selection of the RS Port on
the receiver to function as the bind port or auxiliary port,
display of the List screen in Expert mode or Standard,
voltage alarm threshold to be set, Throttle Trim to act as
throttle or brake trim, contrast to be adjusted, and buzzer
loudness to be set.
To aCCess sysTeM
In the List screen rotate the Rolling Selector to highlight
the System function.
Press the Rolling Selector to access the System function.
RS Port
The RS Port function allows the Remote Start feature
(available in the future on remote start compatible
vehicles) to be enabled on either the Bind port or
Auxiliary channel port of the SR3300T using the
Remote Start Button.
List
List selects either an Expert or Standard screen to be
displayed. The Expert selection enables all functions
to be displayed on the List screen. The Standard List
selection enables seven commonly used functions
including: Model Select, Model Name, Travel, Reverse,
Sub Trim, Bind and System.
Alert
The Alert sets the voltage threshold of the transmitter’s
battery pack at which the transmitter’s alarm sounds.
Throttle: TRIM
Selects how the TH Trim switch function behaves. The
default function acts as a throttle trim. The alternative
BRAKE function enables it to act as full (panic) brake
trim.
Contrast
The contrast function provides adjustment to the
brightness ratio of the lightest to the darkest part of the
screen.
Buzzer
The buzzer function is used to control the loudness
of the buzzer.
To access the above functions use the Rolling Selector
and select the desired system function. Press the Rolling
Selector and the surrounding box will flash. Rotate the
Rolling Selector to make your adjustment then press the
Rolling Selector to select the value.
To return to the main screen press and hold the Rolling
Selector for more than three seconds.
www.pitstop-shop.nl
