10
Storing readings in short-term memory
While in measurement mode, pressing the
MODE/
HOLD
button will freeze the value on the LCD and
store the number in memory. The LCD will briefly dis-
play the memory location number and then the value
stored. The
HOLD
symbol will appear above the tem-
perature reading. Momentarily press
MODE/HOLD
again to return to normal operation.
The short-term memory can hold 15 readings. After 15
readings have been saved, the SoilStik will return to
memory location 1 and start overwriting existing data
with newly stored data.
Recalling stored readings
Check that the
HOLD
symbol is not displayed. If it is,
exit the
HOLD
function by momentarily pressing the
MODE/HOLD
button.
To view stored readings, momentarily press the
CAL/
RECALL
button and then press the
MODE/HOLD
but-
ton while the
CAL
symbol is displayed. The storage
location number (1 through 15) will flash. If the meter
accidentally transitions into
CAL
mode (causing the
display to flash), press the
CAL/RECALL
button again
to exit and start over.
Storing and
Recalling
Measurements