6
Installing Back Cover
To install the back cover, place it on the
back of the solar panel as shown in the
image to the right. Ensure the gray ca-
ble is fed through the opening at the top
edge of the cover.
Attaching the clips
Note the five openings along the edge of the cover. The retaining clips
are to be installed at these locations by securing the arrow end of the
clip onto the cover and pressing down to snap into place. See the imag-
es below.
Removing the clips
Use a flathead screwdriver. Insert the screwdriver under the edge of the
clip on the front of the solar panel and twist. The clip will release and
can be slid back and removed.