Figure 3
3/8" Hole Plug
(2 req'd)
Hole Plug Installation
3.
A. If one side of the unit will not have a handle attached, install (2) 3/8" hole plugs
and (2) pinetree buttons in the unused mounting holes as shown.
Figure 3
.
Pinetree Button
(2 req'd)
Laptop Cord Management
4.
A. Using the cord management slots in the trays, and Velcro straps provided, bundle the charge cords.
Figure 4
shows a typical wiring example. Be sure to leave enough slack in the power cord to allow the tray to be pulled out.
B. Route the charging plug to the student-side of the tray to allow easy-access and removal. Anchor with a Velcro strap.
C. Wide adhesive-backed Velcro hook & loop strips are also provided to attach the charging transformer to the tray if necessary.
Bundled charge cords
with Velcro strap
Power Cord
(leave enough slack
to pull tray out)
Instructor-Side
Charging plug
Figure 4
Charging
Transformer
Velcro
straps
Laptop
Student-Side
0106619X Page 2 of 3
g
