0112776R4 Page 1 of 9
Assembly Instructions
Before you begin, please make sure all parts and proper quanti-
ties are included. Any parts damaged during shipment must be
reported within 15 days of receipt. To report information regarding
damages or if you have any questions, please call 1-800-235-1262.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for purchasing Spectrum products!
InVision
™
Media Collaboration Table
48” x 60” - #37102
48” x 84” - #37103
60” x 60” - #37104
60” x 84” - #37105
Phillips screwdriver
glide wrench
(included)
4mm hex wrench
(included)
Tools Required
Note: The worksurface halves must be assembled prior to the table assembly shown here. Refer to
the assembly instructions included with the worksurface halves (Box #1) for assembly procedure.
(26) 035728
1/4-20 x 1/2” PHMS
(8) 0100167
8-32 x 1/2” PH
thread-cutting screw
(16) 059534
1/4-20 x 30mm JC bolt
(2) 0104836
4” snap-in grommet
(1) 021263
3-1/4” round grommet
(4) 037779
5/16-18 x 1” glide
(8) 041289
1/4-20 x 1-3/4” PHMS
(1) 025069
glide wrench
(1) 025039
4mm hex wrench
(2) 0112492
short side panel
(2) long side panel
0112491 - 84” tables
0112542 - 60” tables
(4) cord channel rail
0112495 - 84” tables
0112540 - 60” tables
(1) bottom panel
0112496 - 84” tables
0112541 - 60” tables
Cord Channel (Box #3)
Leg Assemblies (Box #2)
(1) 0112522
front leg assembly
(1) 0112535
rear leg assembly
(with grommet hole)
(2) 059899
1/4-20 x 45mm JC bolt
(2) 021555
1/4-20 JC nut
