background image

Rack-mount Accessories

Rack-Mount Blanks

Cantilever Shelf - 2RU - 97504

Cantilever Shelf - 3RU - 97502

Pull-Out Shelf - 2RU - 97505

Pull-Out Shelf - 3RU - 97503

 

Locking Drawer - 2RU - 97523

Locking Drawer - 3RU - 97522

Single Fan - 3RU - 97507

Wire Lace Kit - 95517

9-Outlet Power Strip - 1RU - 99021

LT-4 Laptop Storage Unit - 7RU - 97517

• Provides wire management

• Mounts to standard rack rails

• Includes (3) lace straps and 

mounting screws

• Includes (12) 5.5” zip ties

• Shipping weight: 1.25 lb [.57 kg]

1RU - 97510

2RU - 97511

3RU - 97512

4RU - 97513

• Fills rack spaces where 

components are not needed

• 16 ga steel

• Shipping weight: <1 lb [.45 kg]

• 50 cfm

• 120V~50/60 Hz, 15/13W

• RoHS

• 19”W [48.27 cm] x 1.56”D [3.97 cm] 

x 5.25”H [13.33 cm]

• Shipping weight: 3.78 lb [1.7 kg]

• Holds four full-size laptops

• 16ga & 20ga steel

• 18.75”W [47.94 cm] x 20.5”D [52.11] 

x 12.25”H [31.11 cm]

• Shipping weight: 30 lb [13.6 kg]

• 8 outlets rear

(breaker-protected)

• 1 convenience outlet front

• 115VAC, 60 Hz, 15 amps max

• 9’ power cord

• Front LED power switch

• Enhanced surge protection

• ETL-listed, UL-listed

• 19”W [48.27 cm] x 9.25”D [23.5 

cm] x 1.74”H [4.41 cm]

• Shipping weight: 8.7 lb [3.9 kg]

• 16ga steel

• Drawer: 15.97”W [40.56 cm] x 

14.56”D [36.98 cm] x 3”H [7.63 cm]

• Weight capacity: 50 lb [22.7 kg]

• Shipping weight: 15.85 lb [7.2 kg]

• 16ga steel

• Drawer: 15.97”W [40.56 cm] x 

14.56”D [36.98 cm] x 5.25”H 

[13.33 cm]

• Weight capacity: 50 lb [22.7 kg]

• Shipping weight: 18.5 lb [8.4 kg]

• 16ga steel

• 17.09”W [43.42 cm] x 22.11”D 

[56.14 cm] x 5.25”H [13.33 cm]

• Weight capacity: 80 lb [36.3 kg]

• Shipping weight: 18.5 lb [8.4 kg]

• 16ga steel

• 17.09”W [43.42 cm] x 18.12”D 

[46.03 cm] x 3.5”H [8.89 cm]

• Weight capacity: 50 lb [22.7 kg]

• Shipping weight: 15.6 lb [7.1 kg]

• 16ga steel

• Shelf: 17.5”W [44.45 cm] x 18”D 

[45.7 cm] x 3.5”H [8.89 cm]

• Weight capacity: 50 lb [22.7 kg]

• Shipping weight: 8.1 lb [3.7 kg]

• 16ga steel

• Shelf: 17.5”W [44.45 cm] x 18”D 

[45.7 cm] x 5.25”H [13.33 cm]

• Weight capacity: 80 lb [36.3 kg]

• Shipping weight: 9.2 lb [4.2 kg]

Double Fan - 3RU - 97506

• 100 cfm

• 120V~50/60 Hz, 15/13W

• RoHS

• 19”W [48.27 cm] x 1.56”D [3.97 cm] 

x 5.25”H [13.33 cm]

• Shipping weight: 5.47 lb [2.5 kg]

See 

spectrumfurniture.com

 for the latest

accessories and detailed warranty information.

0118408R12 Page 16 of 20

Summary of Contents for Freedom One eLift Lectern 55357





















Reviews: