3. Attach cord reel to mounting bracket
0115955R1 Page 2 of 4
Figure 2B
Figure 2C
Vertical left:
Horizontal right:
Figure 2A
Vertical right:
2. Attach mounting bracket to lectern
1. Set the mounting bracket into one of the
three positions below.
2. Align the mounting holes and attach to
the base panel with (3) #14 x 7/8” PHSM
screws and tighten securely.
Figure 3B
Figure 3C
Figure 3A
left side of
typical base
panel
right side
of typical
base panel
mounting
bracket
mounting
bracket
mounting
bracket
cord reel
cord reel
cord reel
connector pin
connector pin
connector pin
#14 x 7/8”
PHSM screw
(3 required)
#14 x 7/8”
PHSM screw
(3 required)
#14 x 7/8”
PHSM screw
(3 required)
right side
of typical
base panel
left side of
typical base
panel
right side of
typical base
panel
right side
of typical
base panel
1. Align the cord reel mounting hole with the mounting
bracket hole and install the connector pin.
Tools
Required
Phillips
screwdriver
