![Spectrum Digital TMS320C6713 DSK Technical Reference Download Page 34](http://html.mh-extra.com/html/spectrum-digital/tms320c6713-dsk/tms320c6713-dsk_technical-reference_1344844034.webp)
Spectrum Digital, Inc
3-11
3.6.3 JP3, PLD Programming Connector
This connector interfaces to the Altera CPLD, U12. It is used in the in the factory for the
programming of the CPLD. This connector is not intended to be used outside the
factory.
3.7 System LEDs
TheTMS320C6713 DSK has four system light emitting diodes (LEDs). These
LEDs indicate various conditions on the DSK. These function of each LED is shown in
the table below.
3.8 Reset Switch
There are three resets on the TMS320C6713 DSK. The first reset is the power on
reset. This circuit waits until power is within the specified range before releasing the
power on reset pin to the TMS320C6713.
External sources which control the reset are push button SW2, and the on board
embedded USB JTAG emulator.
Table 7: System LEDs
Reference
Designator
Color
Function
On Signal
State
D4
Green
USB Emulation in use. When External JTAG
Emulator is used this LED is off.
1
D3
Green
+5 Volt present
1
D6
Orange
RESET Active
1
DS201
Green
USB Active, Blinks during USB data transfer
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com