WARNING
Please read the instructions in this manual carefully before using
your Spectroline
®
E-Series lamp. Never use this equipment in any
manner not specified in these instructions because the protection
provided by the equipment may be impaired. We recommend
using Spectroline UV-absorbing protective eye and face wear
( i.e., UVS-30 spectacles, UVG-50 goggles or UVF-80 face shield).
DANGER — Ultraviolet radiation emitted from this product.
Avoid exposure. ALWAYS WEAR PROTECTIVE CLOTHING.
EXPOSURE MAY CAUSE PREMATURE AGING OF THE SKIN AND
CANCER. ALWAYS WEAR PROTECTIVE EYEWEAR; FAILURE TO DO SO
MAY RESULT IN SEVERE BURNS OR LONG TERM INJURY TO EYE. Never
look directly into the lamp. Exposure can cause eye and skin allergy and
allergic reactions. Medications or cosmetics may increase your sensitiv-
ity to ultraviolet radiation. Consult physician before operating this prod-
uct if you are using medications or have a history of skin
problems or believe yourself especially sensitive to sunlight.
For Laboratory Use Only
OPERATION
1. Connect the plug to a power outlet that complies with the
electrical requirements specified on the lamp’s label. The
E-Series lamps are available in 120V/60Hz, 230V/50Hz or 100V/50-
60Hz versions.
2. The power supply cord is the disconnect for this unit.
3. To turn on the 120V and 100V models, press and hold the dimple
on the rocker switch(es) for approximately 5 seconds to power
the tube(s). To power the 230V F and FB models, press the
rocker switch to the ON (I) position. The 230V models designed to
produce two wavelengths have a 3-position power switch. The
tube(s) should become energized and emit a steady light. The
light may initially flicker, especially if the lamp is cold, but should
stabilize after a few seconds.
4. To turn off the 120V and 100V models, press down on the
opposite side of the switch. Press the rocker switch to the OFF (O)
position on the 230V models.
MODELS
1
/F
2
/FB
2
/J
3
WAVELENGTH
TUBE
FILTER
EA-140
1
; /F
2
; /FB
2
; /J
3
UV-A
BLE-220B
EN-140; /F; /FB; /J
UV-A
BLE-270W
EN-140L; /F; /FB; /J
UV-A
BLE-270W
2F003
EA-240; /F; /FB; /J
4
UV-A
Two BLE-220B
4
EA-150; /F; /FB; /J
UV-A
BLE-50H
EA-160; /F; /FB; /J
UV-A
BLE-480B
EN-160; /F; /FB; /J
UV-A
BLE-6T365
EN-160L; /F; /FB; /J
UV-A
BLE-6T365
2F005
EA-180; /F; /FB; /J
UV-A
BLE-760B
EN-180; /F; /FB; /J
UV-A
BLE-8T365
EN-180L; /F; /FB; /J
UV-A
BLE-8T365
2F082
EN-280L; /F; /FB; /J
UV-A
Two BLE-8T365
2F082
EB-160C; /F; /FB; /J
UV-B
BLE-6T312
2F006
EB-180C; /F; /FB; /J
UV-B
BLE-8T312
2F018
EB-280C; /F; /FB; /J
UV-B
Two BLE-8T312
2F018
EF-140C; /F; /FB; /J
UV-C
BLE-2537S
2F001
EF-160C; /F; /FB; /J
UV-C
BLE-6254S
2F006
EF-180C; /F; /FB; /J
UV-C
BLE-8T254
2F018
EF-260C; /F; /FB; /J
UV-C
Two BLE-6254S
2F006
EF-280C; /F; /FB; /J
UV-C
Two BLE-8T254
2F018
ENF-240C; /F; /FB; /J
UV-A &
BLE-270W
2F001
UV-C
BLE-2537S
ENF-260C; /F; /FB; /J
UV-A &
BLE-6T365
2F006
UV-C
BLE-6254S
ENF-280C; /F; /FB; /J
UV-A &
BLE-8T365
2F018
UV-C
BLE-8T254
ENB-260C; /F; /FB; /J
UV-A &
BLE-6T365
2F006
UV-B
BLE-6T312
ENB-280C; /F; /FB; /J
UV-A &
BLE-8T365
2F018
UV-B
BLE-8T312
EBF-260C; /F; /FB; /J
UV-B &
BLE-6T312
2F006
UV-C
BLE-6254S
EBF-280C; /F; /FB; /J
UV-B &
BLE-8T312
2F018
UV-C
BLE-8T254
EF-140; /F; /FB; /J
UV-C
BLE-2537S
EF-160; /F; /FB; /J
UV-C
BLE-6254S
EF-180; /F; /FB; /J
UV-C
BLE-8T254
1
All domestic models (without /F, /FB, /J) are 120V, 60Hz and 0.17 amps
2
All /F, /FB models are 230V, 50Hz and 0.17 amps. All units conform to CE standards
3
All /J models are 100V, 50-60Hz and 0.17 amps*
4
Dual tube units of the same wavelength are 0.34 amps, with the exception of the
EA-240 models, which are 0.17 amps.
Long Wave (UV-A): 365nm Medium Wave (UV-B): 312nm Short Wave (UV-C): 254nm
7
2
E-SERIES ELECTRICAL SPECIFICATIONS
