RCA INTERCONNECTS AND REMOTE WIRING
RCA INTERCONNECTS AND REMOTE WIRING
Run the RCA interconnects and the remote lead from the head-unit to the amplifi er. Note that RCA interconnects must
Run the RCA interconnects and the remote lead from the head-unit to the amplifi er. Note that RCA interconnects must
be routed separately from the main +12V power cable. Connect the remote (turn on/turn off) lead to the REM input
be routed separately from the main +12V power cable. Connect the remote (turn on/turn off) lead to the REM input
terminal of the amplifi er and to the remote output lead of your head-unit. Now plug in the RCA interconnects to the
terminal of the amplifi er and to the remote output lead of your head-unit. Now plug in the RCA interconnects to the
line-outs of the head-unit and to the RCA inputs of the amplifi er. Pay attention when connecting the RCA cables: The
line-outs of the head-unit and to the RCA inputs of the amplifi er. Pay attention when connecting the RCA cables: The
left line out must be connected to L-CH input, the right line out must be connected to R-CH input.
left line out must be connected to L-CH input, the right line out must be connected to R-CH input.
LOUDSPEAKER WIRE ROUTING
LOUDSPEAKER WIRE ROUTING
Once the speaker cables have been routed, turn loose the speaker terminal screws and after inserting the stripped
Once the speaker cables have been routed, turn loose the speaker terminal screws and after inserting the stripped
speaker cables, tighten up the screws. Always maintain correct electrical polarity of speaker wires to the respective
speaker cables, tighten up the screws. Always maintain correct electrical polarity of speaker wires to the respective
terminal („+“ to „+“; „-„ to „-„).
terminal („+“ to „+“; „-„ to „-„).
MAIN POWER CABLES
MAIN POWER CABLES
Run the positive main power cable („+12 V“) directly from the positive terminal of the car battery to the amplifi er.
Run the positive main power cable („+12 V“) directly from the positive terminal of the car battery to the amplifi er.
For protection of your car audio system against electrical short cuts and fi re hazards, you must insert
For protection of your car audio system against electrical short cuts and fi re hazards, you must insert
a fuse holder
a fuse holder
within the fi rst 30cm of the positive main power cable.
within the fi rst 30cm of the positive main power cable.
The applicable fuse value must match to the limitations of
The applicable fuse value must match to the limitations of
your main power cable cross section and serves to protect the vehicle from a shortcut of the +12V cable to chassis
your main power cable cross section and serves to protect the vehicle from a shortcut of the +12V cable to chassis
ground!
ground!
Connect the ground cable to the ground terminal input of your amplifi er and the other side of the cable to a rust free
Connect the ground cable to the ground terminal input of your amplifi er and the other side of the cable to a rust free
ground point in your vehicle. Keep the ground cable („-12V“) as short as possible. The ground power cable must have
ground point in your vehicle. Keep the ground cable („-12V“) as short as possible. The ground power cable must have
the same cross-section as the positive power cable. Tighten up both power input terminals, and double check for
the same cross-section as the positive power cable. Tighten up both power input terminals, and double check for
perfect and solid fi t!
perfect and solid fi t!
C
ABLE
R
OUTING
38
Spectron_Manual_SP-R2200-R4100-1500.indd 38
Spectron_Manual_SP-R2200-R4100-1500.indd 38
9.10.2007 11:01:30 Uhr
9.10.2007 11:01:30 Uhr
