4
HOUSING MAINTENANCE
The lamp housing is designed for the protection of internal parts. After unplugging
the unit, clean spills on the outer housing with water and a mild detergent. Wipe
the unit dry. After unplugging, periodically clean the clear protective glass filter with
a cleaner and a soft cloth.
CLEAR GLASS FILTER PROTECTOR REPLACEMENT
A set of detailed instructions for Replacing the Clear Glass Filter Protector comes
with the ordered replacement parts. Contact Customer Service for more details.
Call toll-free 1-866-230-7305.
REPLACING THE UV-A LENSES
The UV-A lenses covering the four UV-A LEDs must be replaced over time. They
will solarize (become cloudy and yellow) from repeated use. A set of detailed
instructions come with the replacement UV-A lenses. See Replacement Parts
section and contact Customer Service for more details.
ENVIRONMENTAL CONDITIONS
The EDG-4W lamps are designed to be safe under the following conditions:
• For Indoor/Outdoor Use (dustproof and protected against low pressure jets of
water);
• Temperature 41°F to 122°F (5°C to 50°C);
•
Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage
