Chapter 3
Configuring for Ethernet
Airnet II Particle Sensor Operations Manual
Page 3-7
Viewing Configuration Settings
Type
sta
(
tus
) and press the
Enter
key to display the Airnet II particle sensor’s
configuration settings, software version, and connection status.
If this command does not produce any kind of activity on the display screen:
•
the terminal emulator may be set up incorrectly, or
•
the cable may be improperly connected or faulty.
Connecting the Ethernet Cable
The Airnet II particle sensor communicates with FacilityPro or Facility Net software by
means of a CAT 5 UTP Ethernet cable. The sensor is designed to work best with a CAT 5
UTP cable. Other types of Ethernet cable may produce excess noise. Your Information
Systems Manager, Network Administrator, or other appropriate computer support
personnel may be able to assist in procuring a cable or fabricating a custom-length
cable.
When connecting the Airnet II particle sensor to a network, FacilityPro or Facility Net
software will find the sensor on the network. If using Facility Net, refer to the
Facility Net Operations Manual
.
