Installing WinHost Software
22
SafEye Quasar 900 Gas Detector User Guide
Figure 7: Setup Table Window
To configure the heater state body:
1
From the main window, click Setup.
The setup table window appears.
2
Define the parameters as required.
See Setup Table Parameters on page 22 for all available parameters.
3
To define the new setup configuration, click Set.
5.2.1
Setup Table Parameters
This section describes the various parameters that you can view in the setup
table window.
Table 5: Gas Type (Read Only)
Gas Type
Description
1
100% Methane
2
100% Propane
3
100% Ethylene