manualshive.com logo in svg

SpectraLink 8002, Administration Manual

Share
Download
SpectraLink 8002 Administration Manual Download Page 34

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP) 

34 

PN: 1725-36034-001_B.doc 

User-defined Preferences (Standby Menu) 

The following user-defined preferences are also covered in the 

SpectraLink 8002 Wireless Telephone User Guide

. The system 

administrator can refer to this list for more information about 
customizing handset settings.  
To configure the following options, the handset must acquire the 
system (no error message may display) and be at the extension 
display. This is the standby mode. While in the standby mode, press 
and hold 

FCN

 briefly to open the user options menu. Use the 

following keys to display and select options: 

Up/Down 

buttons: 

Display previous/next menu item.

 

Select

 button: 

Selects the menu item or option. 

OK 

softkey: 

Selects the menu item or option. 

Save

 softkey: 

Saves the entry. 

Bksp 

softkey: 

Backspaces to allow editing of entry. 

Cncl

 softkey: 

Cancels edit and return to previous menu level. 

Up

 softkey: 

Returns to previous menu level. 

Exit

 softkey: 

Exits the menu (at the top level). 

End Call

 key: 

Exits to standby state (from any level). 

Standby mode, options menu 

 

 

Lock Keys 

Ring Options 
Phone Options 
System Info 

OK    Exit 

 

Summary of Contents for 8002




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands