Getting Started
Spectral Products
•
Zero
allows the recalibration of the position of the zero order transmission of the monochromator.
The user must first execute a Zero Scan and note the value (in steps) of the zero order
transmission peak.
CM-Series
DK-Series
.
.
•
Query
(CM Models only)
displays the monochromator status.
•
Units
(CM Models only) sets
the units used in the
Goto, Scan, Size,
and
Calibrate
commands. For
DK models the only unit available is nm.
•
SlitsAdj
(DK models only)
adjusts all slits to a given width.
•
GrtID
(DK models only)
returns the six byte ruling identifier of the current grating.
Spectral
Products
2659 Pan American Fwy, Suite A, NE Albuquerque, NM 87107 Ph. (505) 343-9700 Fax (505) 343-9705
13
o
time delay
sets the time in ms to wait before
echo back.
o
port number
sets the com port of the
monochromator.
o
TURRET Number:
Use to select Turret 1,
Turret 2, or both if you have double
monochromator model CM112. For CM110
select Turret 1.
o
MONO Number:
Use to specify DK model.
For DK240 or DK480 select 1. For DK242
select 2.
o
Steps from Zero:
Enter the value in steps of the
zero order transmission peak from the Zero Scan.
o
time out, echo byte, status byte, and cancel
byte
are diagnostic parameters associated with
the LabVIEW program.
o
Run
enters the new zero position.
o
Exit
closes the command window.
