manualshive.com logo in svg

Spectracom TPRO-cPCI, User Manual, Page: 6 / 46

Share
Download
Spectracom TPRO-cPCI User Manual Download Page 6

TPRO-cPCI/TSAT-cPCI  

Spectracom Corporation 

 

 

Synchronizable Timecode Generator User Manual 

iv 

5.6.1 Examples 

for 

Setting the Heartbeat ...............................................................................................5-5 

5.7 Select 

Oscillator Output Frequency................................................................................................5-6 

5.8 Set 

Offset Time ..............................................................................................................................5-6 

5.9 

Read Number of Satellites Tracked and Altitude............................................................................5-7 

5.10 Read 

Longitude..............................................................................................................................5-8 

5.11 Read 

Latitude.................................................................................................................................5-8 

5.12 Enable/Disable 

Synchronization Flat..............................................................................................5-9 

5.13 Read 

Synchronization Enable Flag ................................................................................................5-9 

5.14 Factory 

Test Messages..................................................................................................................5-9 

5.15 Read 

Version ...............................................................................................................................5-10 

5.16 Lamp 

Test ....................................................................................................................................5-10 

5.17 Blink 

Yellow Mode........................................................................................................................5-10 

6 OPTIONS 

AND 

ACCESSORIES................................................................. 6-1 

6.1 Accessories....................................................................................................................................6-1 
6.1.1 TRIM-CAB-D-D-100 

(TSAT-cPCI Only) .........................................................................................6-1 

6.1.2  GPS Optic Isolator (TSAT-cPCI Only)............................................................................................6-1 

7 DRIVER 

SUPPORT ................................................................................... 7-1 

 

 

Summary of Contents for TPRO-cPCI















































Reviews:

No comments