Spectracom TPRO-cPCI, User Manual, Page: 11 / 46

Spectracom Corporation TPRO-cPCI/TSAT-cPCI
Synchronizable Timecode Generator User Manual 2-1
2 Settings, Connection, and Configuration
2.1 Jumper Settings
The board has three push-on configuration jumpers. Verify that these are installed as shown in
Figure 2.1. (Certain custom options may call for these these jumpers to be arranged differently
than shown in the example. Such options include supplemental instructions to explain the
jumper settings).
1 3 5 7
16
9
2
15 13 11
14 12 10 8 6 4
JP1
Figure 2.1– Jumper Settings
Jumper numbers are not printed on the board.
Jumper 11 to 12 connects the programmed Oscillator Output frequency to the RS-422 driver
input.
Jumper 13 to 14 connects the
Heartbeat output from the on-board circuitry to the Timing
connector.
Jumper 15 to 16 connects the
Match output from the on-board circuitry to the Timing
connector.
The normal jumper setting consists of jumpers at locations 11 to 12, 13 to 14, and 15 to 16; and
no jumpers at 1 to 2, 3 to 4, 5 to 6, 7 to 8, and 9 to 10, as shown above.
Jumpers 1-10 are reserved for custom options.