
6
Release Control
The release control knob affects the signal release time after initial signal compression.
Maximum release time, marked "100" on the front panel, will slowly restore gain to the original level. Long release times are often
used for multiple source program material, main program channel material, mastering, or very slow source material from a single
source.
Slope Control
The slope control provides the widest range of compression/limiting ratios available, from 1.1:1 to 100:1. When the slope control is
set for minimum compression, the knob is set at "10", thus providing peak limiting and linear amplification of 20dBu. When the slope
is set for maximum compression, the knob is set at "0", for a flat slope of up to 100:1, or 20dB of compression.
Phantom Power
48 volt switchable terminated to the microphone input only.
Phase
180 degrees, switchable.
Gain Reduction Meter (LED)
LED type, calibrated 20 dBu segment type design. Shows gain reduction/compression real time.
Vu Meter
0vu = +12 dBu, output level monitor type meter.
Mic / Line Input
Switches between microphone and line input. Line Input has 20 db pad. Line Input will accept balanced or unbalanced source.