Engl
is
h
23
E-Compass Calibration
•
Press on the Windows key.
•
Scroll down until you see the
Compass
icon.
•
Tap on the
Compass
icon to open the Compass utility.
•
Tap on the
Calibration
tab.
•
Put the receiver down on a table to give it a horizontal
position (see picture [1] below).
•
Tap on the
Start
button located in the task bar to start the
calibration process.
First horizontal calibration is ready to go.
•
Slowly rotate the receiver by a couple of turns while
keeping it horizontal (see picture [1] below).
Wait until the receiver indicates that horizontal calibration
is complete and prompts you to start vertical calibration
(“Ready” displayed underneath the Vertical calibration
button).
•
Take the receiver in your hands (see picture [2] below),
put it in vertical position then slowly rotate it by a couple
of turns, in the vertical plane. Then gently put it back
down on the table.
•
Wait until calibration is complete before proceeding.
[1]
[2]
