9
Electrical
The AC power supply accepts input voltages from 100
-
300 Volts AC, 50/60Hz. Connector supplied is for US
-
style 110V AC. Other connectors may be attached to
the input connector. The AC power supply charges the
battery through the Solar Controller. To charge the
battery or run the system on AC power just plug it into
an outlet and turn on the main power switch. The
battery is not connected if the MAIN POWER switch is
off.
There are two 15A fuses, one for the battery and one
for the pump.
Battery Fuse
Note: Unit is shipped with the battery fuse removed
Pump Fuse
For purchased Solar Power
Pack models only
, the
included Solar panel fits into
the lid of the case. Unfold and
connected to the cables in the
case.
The Solar Power connectors
are unique and they will only
connect one way.
The Solar Charge Controller will show when the
battery is charging (the green light flashes) and the
level of battery charge.
The battery must be fully charged for
storage.
Note that the Main Power switch must be on for
the battery to charge or for the system to operate.
The power switch may blink if it is not turned on
and power is connected.
The pump is controlled by the switch on the right.
Both lights must be off for storage or
the battery will lose it
’
s charge.
