SPECTRA CR700 DUAL DETECTORS
3
Re-pairing Instructions
Switch on Machine CR700
●
Allow it to CAL. (Calibrate)
●
Press Menu button. MENU is shown briefl y, then the back light setting.
●
Press down arrow once. Display shows “RDIO” for radio linking.
●
Press ENTER (bottom left hand button). Display will fl ash.
●
Using up & down buttons, scroll through OF / LS / HL
●
(OF = off / LS = laser / HL = detector)
●
Leave
HL
fl ashing, (You are pairing with the
second CR700
detector)
●
Press ENTER, HL stops fl ashing.
●
Press Down arrow. Display shows PAIR *.
●
Press ENTER again, * symbol rotates.
Switch on Cab Repeater CR700
●
Allow it to CAL. (Calibrate)
●
Press Menu button. MENU is shown briefl y, then the back light setting.
●
Press down arrow once. (Sounder button). Display shows RDIO, for radio linking.
●
Press ENTER, if
HL
is not shown. To change to
HL
, use Up / Down scroll buttons.
●
Press ENTER again to stop HL fl ashing
●
Press down button again (Sounder button) to display PAIR *
●
Press ENTER again to make * symbol rotate.
●
Cab Repeater CR700 detector will beep and show “PAIR OK”
●
Switch Off both CR700 detectors.
●
The pairing procedure is now COMPLETE.
To ensure this has been completed correctly:
●
Switch on Machine CR700 FIRST Allow it to CAL.
●
Switch on Cab Repeater CR700 secondly. Also allow it to Cal.
●
Display shows
RMT.D,
with OK fl ashing. (
RMT.D
= remote detector, the Cab Repeater)
●
Quickly press ENTER. (Bottom left-hand button)
●
Both detector’s LCD will show an aerial mast symbol, (bottom left-hand side) to confi rm
pairing is completed OK.
●
Using the magnetic mount, fi x Machine CR700 externally (to excavator dipper arm) & the Cab
Repeater CR700 in the cab, without obstructing the Operator’s view.
If you need to re-pair the Spectra CR700’s - please follow the steps below.
