Spectra Logic T120 LIBRARY, Instructions Manual

Page: 8 / 8

8
Front Panel LED Board Replacement
90950014
4. Connect the cable to the connector on the LED board.
5. Using the two screws you removed in step 1, secure the new board to
its mounting plate.
C
OMPLETE THE
P
ROCEDURE
Follow these steps to complete the procedure.
1. Reassemble the library by following the steps in Access the LED board
on page 5 in reverse order.
2. Power on the library by following the steps in Powering Off the Library
on page 4 in reverse order.
3.
Restart any backup processes that you stopped for this procedure.
4. Dispose of the used component is a responsible manner.
Figure 5 LED board installation (close up interior view).
LED board
This view—looking at the back side of the interior
cover panel—shows the LED board unscrewed from its
Mounting holes
Mounting plate
Cable connector
mounting plate and tilted out with the cable connected.
(tilted out)
Screw (2x)
Connector
Mounting
holes
Mounting orientation