4
Spectra 50-Series Library Tape Drive Replacement Guide
Introduction
About This Guide
This guide describes the procedure for replacing a tape drive in the Spectra 50-Series library.
Note:
This guide shows pictures of a library that has two full-height drives installed.
The same procedure can be followed for any drive configuration.
Estimated Time Required
This procedure takes about 30 minutes.
Materials and Tools Required
You need a replacement LTO tape drive as shown in Figure 1. Note that the drive needs to be:
• The same type as you already have installed in the library.
• The drive must be already installed in a Spectra 50-Series library drive sled.
You also need:
• A #1 Phillips screwdriver
• An anti-static wrist strap
Figure 1
An LTO tape drive in a Spectra 50-Series library drive sled.
