Chapter 2. Installing the Library
12
6.
Remove the plastic piece and the foam piece that protect the robotic picker
(Figure 2-1).
Caution:
Take care when removing these pieces not to damage the door
sensor cable (the white cable that runs along the right side of the
library).
Note:
Remember to save all packaging materials in the event that you
need to ship the library at a later date.
7.
Remove the packaging around the data cartridge magazine(s).
8.
Move the library to where it will be used.
9.
Plug the library in but do
not
turn on the library.
Remove plastic.
Remove foam.
Figure 2-1
Remove the plastic and foam that protect the robotic picker from moving while shipping.
