Chapter 3. Using the HTTP Interface
25
Note:
Enabling CRC will have an impact on performance.
Protocol User Name
Set a User Name for iSCSI.
Password
Set a Password for iSCSI.
iSNS
iSNS Enabled
Check this box to enable iSNS. When iSNS is enabled it is necessary to
specify the IP address of the iSNS server.
iSNS IP Address
Enter the IP address of the iSNS server. This must be a valid server IP
whenever iSNS is enabled.
iSNS Port
The default port (3205) is assigned by IANA and should not be modified
under normal conditions.
Set iSCSI and iSNS to Defaults
Select if you want the default parameters reset.
Change iSCSI and ISNS
Select if you want to save the parameters.
iSCSI Device Names
Tape Drive:
This is the tape drive device name.
