Chapter 3. Using the HTTP Interface
23
The Ethernet Port Setup screen allows you to configure the Hostname, IP Address, IP
Subnet Mask, and Gateway for your Ethernet interface. You can also enable DHCP and
WINS in this screen. Select
Change
to have the configuration saved.
Hostname:
The name for the IP interface. This is used by DHCP, DNS, and other
communications for name resolution. The hostname should be less than 12 characters
to support DHCP and DNS naming conventions.
IP Address:
Static IP address. This field is not available while in DHCP mode.
IP Subnet Mask:
IP network mask (standard IP parameter).
Gateway:
Gateway address (standard IP parameter).
Enable DHCP:
Select to enable DHCP. If DHCP is disabled, you must provide a static IP
address.
Note:
If DHCP is used, the IP address should never expire. The DHCP
servers should be configured to supply an IP address that will
never change.
Enable WINS:
Select to enable WINS.
WINS Primary:
IP address for the primary WINS server.
Change:
Select
Change
to save parameters.
