9
Spectra 10K Library Preventative Maintenance Guide
5.
Use a #1 Phillips screwdriver with a long shaft to loosen the eight captive screws
holding the carousel to the library chassis.
Caution:
Captive screws cannot be completely removed. Loosen the screws
sufficiently to disengage them from the chassis.
6.
Rotate the robotic arm so that the gripper jaws point to the rear of the library, as
shown below; the carousel does not come out unless the gripper jaws face the rear
of the library.
A diagram
showing
how the
carousel
would be
seen from
the top
with the
library’s
cover
8 captive screws
Rear of Library
Guide Pins
