Technical Manual
MX800 Transceiver T19 Option
Figure 1-5 SELCALL commands menu
1.6.5.1
Repeater Setup
If this command is enabled, a successful decode will put the radio into the 'Repeater Setup' state. The
radio will then retransmit any valid (qualified) audio. This functionality is governed by the repeater type
setting, see Table 1-5 Repeater Functionality.
1.6.5.2
Repeater Knock-Down
If this command is enabled, a successful decode will put the radio into the 'Repeater Knock-Down' state.
Depending on the repeater type setting, the radio will not re-transmit any valid audio.
1.6.5.3
Repeater Enable
If this command is enabled, a successful decode will enable the radio as a full repeater. This is similar to
setting the radio to the 'Unconditional' repeater type and having the DIP switch DIP2-4 in the 'ON'
position.
1.6.5.4
Repeater Disable
If this command is enabled, a successful decode will disable the repeater function in the radio. This is
similar to setting the radio to the 'Unconditional' repeater type and not having DIP switch DIP2-4 in the
'ON' position.
23
© SPECTRA ENGINEERING 2010 Revision 1.0.4