HW102 Product Map
HW102 Operation
1. ON: insert 2mm pin into the HW102 & connect the USB output to a power source (not
included)
2. Twist the HW102 cover from base & insert liquid into the base. (NOTE: the liquid should be
no less than min. line and not exceed max. line)
3. Place the HW102 cover back onto the base and ensure the placement dot on both the cover
& base are aligned (see Product Map)
4. OFF: disconnect the USB output from the power source (not included)
NOTE: it is recommended to power off mist & light option prior to unplugging the HW102
HW102 Instruction for Mist option
Instruction
Description
Press MIST button once
Duration of mist will last 30 minutes
Press MIST button twice
Duration of mist will last 60 minutes
Press MIST button 3 times
Duration of mist will last 120 minutes
Press MIST button 4 times
Duration of mist will last 180 minutes
Press MIST button 5 times or
press & hold
Power off
NOTE:
-
Do not exceed the indicated water level on the HW102
-
To avoid liquid spilling, carefully insert the 2mm pin into the HW102 base
-
A yellow LED will light up to visually indicate the selected duration of the mist. Once the
selected duration expires, the HW102 will automatically power off
-
Light option does not need to be activated to enjoy the HW102 in mist option
-
To enjoy mist with scented oil (not included), add 3 drops of scented oil with water into the
HW102 base
Timer option
Light button
Mist button
Placement dot (cover)
Placement dot (base)