77
7-7-4. Device
Select
Device
to set device settings of the ZS
ALARM OUT:
Set the sensor, motion, and video loss for triggering alarm relay.
HDD Error and Video Loss can be set for triggering a beeping sound
The following settings can be changed to trigger an alarm output.
o
ALARM DURATION
DIGITAL DETERRENT:
The schedule of digital deterrent can be set and a sound file can be
uploaded to the ZS.
To set up schedule, select
CHANNEL >
select
SOUND TYPE >
select
Area.
CONTROLLER:
Set the controller speed, type and ID.
CHANNEL:
Select the Channel to configure audio input
o
AUDIO SOURCE:
Local Audio (RCA) or IP CAM Audio
KEYTONE
: Sets On or Off of Key Tone.
REMOTE CONTROLLER ID
: Sets an ID number of which remote control to receive commands.
SENSOR:
Select the type of sensor.
IEEE 802.3af POE Status
: a table showing the status of all POE devices connected to the ZS.