9
Don’t connect others I/O in AC/DC mode, measure AC/DC voltage in any
types of I/O function or operate AC/DC measure function in charge mode.
2. PATTERN OUT (NTSC): Press
▲ or ▼ to switch 5 different modes.
(NTSC V RAMP) (NTSC V COLOR) (NTSC H GRAY) (NTSC V GRAY)
(NTSC H RAMP)
3. PATTERN OUT (PAL): Press
▲ or ▼ to switch 5 different modes.
(PAL V RAMP) (PAL V COLOR) (PAL H GRAY) (PAL V GRAY)
(PAL H RAMP)
4. AUDIO IN : ON / OFF
5. LED : OFF / LOW / MIDDLE / HIGH
Notice
1. When you first time to start using the test monitor, please charge
battery above 5 hours to make sure this battery is fully charge to
extend its usage life as your cell phone. After that the battery just
charge 2~3 hours could be charged fully and enough usage for 2~4
hours.
2. Battery charge life time is about 250 times and depends on use
environment and operation to decide its decadent speed. Please
follow correct charge method to extend battery life.
