11
AUTO:
Auto-optimize displaying picture under PC mode.
Enter:
This “ Auto” Button can be either “Enter” function in OSD Menu)
CCD
Mode:
Under AV/1 / AV2 / S-Video press
Auto
can be changed to
CCD/Video mode toggle.
MENU:
OSD menu ON / OFF control.
(EXIT
Item)
ADJUST:
Increase or decrease the value on OSD menu.
Up
:
Increase value or turn ON / OFF function.
Down:
Decrease value or turn ON / OFF function
SOURCE:
Select input signal from AV1, AV2, S-Video or VGA (PC).
POWER:
Monitor power ON / OFF. At OFF mode, monitor will be at standby status.
Green Light:
ON Mode
Orange
Light:
Power Saving (Refer to not below)
Red
Light:
OFF Mode
Note: 1. AV1, AV2, S-Video: When there is no input signal, LCD monitor
will into Power Saving mode after 60 seconds.
2. VGA: When there is no input signal, LCD monitor will into power
saving mode after 5 seconds.
3. PIP: When there is no signal on both input sources, LCD
monitor will into Power Saving mode after 120 seconds.
Setup your Monitor
