STANDBY
button is to put unit in to standby.
* Audio is still available in power off mode.
REAR PANNEL
1)
POWER
-
Turn On or Turn Off this unit.
2)
AC
IN
- This is used to 2-pole / 3-wire type of connector the
supplied power cord from the monitor to an electrical
outlet.
3)
CAMERA INPUT
- Channel 1-4 Camera inputs.
(For cameras with 6 pin DIN cameras inputs
and BNC Video inputs)
4)
SLAVE AUDIO OUT
- RCA connector for use with a slave monitor.
SLAVE VIDEO OUT
-
RCA connector for use with a slave monitor.
5)
VCR AUDIO OUT
- RCA connector to transmit audio signal to
VCR.
VCR VIDEO OUT
-
RCA connector to transmit video signal to
VCR.
AUTO mode
Press Quad / Auto 1 / Zoom Button, it displays
C1, C2, C3 and C4 orderly from QUAD screen.
AUTO PIP mode
AUTO2 - Displays PIP mode and you can choose
the main channel with sub-channel sequencing in
order.
AUTO3 - Displays PIP mode and you can choose
the sub-channel with main channel sequencing in
order.
Sequencing time and Channel skip is determined
by value in DWELL TIME in menu.
AUDIO SEL
To select an audio channel, press AUDIO SEL
Button, the icon of a microphone displays on
channel 1 in QUAD mode and when pressed
again moves to next channel.
VCR mode
Press the VCR Button to enter the VCR Mode.
QUAD
AUTO1
STANDBY
ZOOM
OFF
ON
AC IN
AUTO2
- 13 - - 22 -
PUT:90~250V,50/60Hz
CH1
CAMERA INPUT
CH2
CH3
SLAVE
OUT
CH4
AUDIO
VIDEO
VCR
VCR
OUT
IN
TRIGGER OUTPUT
1 2 3 4 GND
AC IN
POWER
AUTO3
AUDIO
SEL
VCR
ENTER
PVS - 3 PVS - 3
