3
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See ILL. 1.
(16)
Lightning -
For added protection for this product during a
lightning storm or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lighting and power-line
surges.
(17)
Power Lines –
An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
(18)
Overloading -
Do not overload wall outlets, extension
cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.
(19)
Object and Liquid Entry -
Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
6-4-2 CHANNEL
The following items can be adjusted or programmed on
this menu screen. Press PIP/Menu Button again, the
following menu screen will be displayed.
[CHANNEL]
TITLE DWELL ALM LOAD
CH1 : C 1 03SEC N/O 75
CH2 : C 2 03SEC N/O 75
CH3 : C 3 03SEC N/O 75
CH4 : C 4 03SEC N/O 75
QUAD : 03SEC N/O 75
EXIT [
]
CHANNEL MENU
a. CAMERA TITLE
- Place the green color character to the date digit using the
◄
,
▼
,
▲
and the
►
Buttons and press the VCR / Enter
Button. The first empty box will be flashing
- Select the position you want to enter the letter or the
numeric number using the
◄
,
►
Buttons.
-
▼
and the
▲
Buttons is to change the new character.
- Press the VCR / Enter Button to return to the menu.
You can enter up to 8 characters for each camera title.
b. DWELL TIME
Dwell Time is the amount of time that a camera is
displayed on the screen, before switching, when the
system is in the Automatic sequential switching mode. The
Dwell Time can be adjusted individually for each camera
and the quad display from 0 to 59 seconds. When it is set
to be zero (OFF) the corresponding camera will be
PVS - 3 PVS -
- 07 - - 28 -
