5
6
P-FA
P-FA
ANTENNA
MUSIC
DC12V GND 75
n
300
n
ON
HOLD
MADE IN KOREA
AC 120-220V 50/60Hz
9. MUTE /POWER
Power switch LCD displayed off and output off
R
EAR PANEL CONTROLS
10. CH PRESETTINGSTATIONS
The unit can store a total of 18 preset for FM band & 12 preset for AM.
When a station is stored, a preset number is assigned to the station. Use
the preset number to tune in to a preset station directly
Ex1) Current receiving frequency: FM1, CH3.
11. PS/AS
1).PS/AS to auto scan the station
1. ACINLET
AC 120V or 220V AC Voltage operation. Then plug AC cord into AC
outlet.
2. FUSE HOLDER (AC)
The fuse holder contains the AC power fuse. Replace only with same type fuse when
it is blown. If it continuously blows, stop replacing fuse and refer servicing to qualified
personnel.
VOLTAGE
AC
1
2
0
V
AC 220 V
FUSE RATING
0. 5A
250V
0. 25A
250V
3. ANTENNA TERMINALS
AM/FM Terminal: You can connect 75 ohm coaxial cable or 300 ohm TV cable
according to the antenna system you have. You may also use an FM dipole antenna
in strong signal areas, (included)
GND Terminal: Ground this terminal if noise or hum is present and when using an
outdoor antenna.
NOTE: When using an outdoor antenna (FM or AM) always provide for lightning
protection.
4. OUTPUTRCA
For connection to an amplifier AUX input.
5. MUSIC ON HOLD OUTPUT TERMINALS
These terminals are to be used for connection to a telephone system for music on
hold. (600 ohm)
6. DC 12-24V INPUT SCREW TERMINAL
This is terminals for DC 12-24V battery power supply, when
unexpected AC power failure.
IMPORTANT NOTICE:
Please note the "+","-" polarity connecting DC 24V. For the connection of battery
connect"+" polarity terminal after"-" polarity terminal connection
