Speco N64NR, User Manual, Page: 24 / 114

EZ Setup & Main Interface
NVR User Manual
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the
picture below. For instance, you can go to the system setup interface by clicking “System” tag.
3.2.3 Main Functions

Camera
The module covers the functions such as
Camera Management
(see Chapter 4 Camera Management for details),
Image Settings
(see 5. 4 Image Configuration for details),
Motion
(see 9.2.1 Motion Configuration for details), and
PTZ
(see Chapter 6 PTZ for details) and so on.

Record
The module covers the functions such as
Encode Parameters
and
Record Schedule
and so on. Please see Chapter
7 Record & Disk Management for details.

Alarm
The module covers the functions such as Sensor and Motion Alarm Handling and Alarm Out Settings . Please
see Chapter 9 Alarm Management for details.

Disk
The module covers the functions such as Disk Management , Storage Mode and Disk Information and so on.
Please see Chapter 7 Record & Disk Management for details.

Network
The module covers the functions such as TCP/IP , DDNS , Port , E-mail and Network Status and so on. Please see
1 1 .1 Network Configuration for details.

Account and Authority
The module covers the functions such as Account Management (see 1 0 .1 Account Management for details) and
Permission Management (see 1 0 .3 Permission Management for details) and so on.

System
The module covers the functions such as Basic Configuration (see 1 1 .2 Basic Configuration for details), Device
Information (see 1 1 .8 View System Information for details), Log Information (see 1 1 .7 View Log for details) and
Configuration File Import & Export (see 1 1 .5 Backup and Restore for details) and so on.
17