85
-
HDD BAD SECTOR
-
HDD ALMOST FULL
o
VIDEO CLIP SETUP:
Setting the duration for pre and post recording.
o
EVENTS AND NOTIFICATION
-
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD:
Enable Email Notification in the event a problem occurs with the NS.
-
ALARM-IN : Enable Email Notification when the camera detects sensor
-
MOTION DETECTION : Enable Email Notification when the camera detects motion
-
NO CONNECTION: Enable Email, Beep and Alarm output Notification when the
camera signal is lost.
-
HDD TEMPERATURE :
Enable Email Beep and Alarm output Notification when the
HDD reaches the maximum temperature
-
HDD BAD SECTOR: Enable Email Notification when the HDD has bad sectors.
-
HDD ALMOST FULL: Enable Email Notification when the HDD is almost full.
-
HDD FULL: Enable Email Notification when the HDD is full.
-
HDD FAILURE: Enable Email, Beep and Alarm output Notification when the HDD
fails.
7-7-3. Record
Select
RECORD
tab to set the recording conditions.
These settings apply to the specified channel only.
Recording Setup
o
RECORDING MODE:
CONTINUOUS, SCHEDULE, MOTION
o
PRE RECORD
: Sets whether to perform or not pre-recording.
o
POST EVENT RECORD
: Sets the duration of the event recording.
o
AUDIO
: Sets whether to perform or not audio recording.
o
SCHEDULE
: Sets the schedule recording.
